Jeep / Chrysler / Dodge Audio / Bluetooth issues with aftermarket head units


Some models will have a factory amplifier.  If your vehicle has one then this will need to be re-powered.  Check the blog at https://www.brashimports.com.au/Blog22.htm

The most common problem is that the amplifier is set to take audio from Left / Right Rear outputs only. 
Bluetooth on most new stereos is set to provide audio on one or both of the front speakers only. 

If you are finding that you have no audio please check is the amplifier being re-powered.
If you find that you have no audio using bluetooth then the wiring will need to be swapped over to suit