|
4" GPS Mirror Monitor with Bluetooth,
FM out & 2 inputs
 
This system combines the
very best of GPS, Hands free Bluetooth and has 2 camera
inputs for reversing/ towing. When in reverse the
monitor will automatically switch to reverse image or
you can manually turn either camera on - PERFECT
It replaces your existing mirror and adheres to most
windscreens This unit is pre-tinted blue (as per
the pic in the manual.
Latest mapping.
Width 250mm!!
READ
THE HARDWARE MANUAL HERE
The units are shipped with the latest road mapping (included in the
purchase price. Ozi Explorer is offered as an option and must be
done BEFORE the unit is shipped (or the unit be returned for registering
the unit etc)The unit is supplied with
a replacement arm and mounting block. The arm will
slide onto most vehicles existing mounting blocks and
has been tested on Toyotas, Fords, Holdens, Nissans.
If this arm does not fit over the existing block then
you will need to use the block supplied and place it
next to the existing block, DO NOT try to remove
your existing block.
Other arms
Arm No 2 is available for Honda Accord and Odyssey,
Vitara
Arm No 3 is available for Passat, Bora, Audi, Skoda,
Jetta, Suzuki Swift
Arm No 7 is available for Hyundai Sonata, Elantras
Please contact prior to purchase to ensure the stock of
the arm required is available.
View the arm catalogue here The other arms are
by special order and can take 4 - 5 weeks.
The special brackets apply but are not limited to the
car models mentioned in the catalogue.
Please consult with your installer as to which arm suits
your car
READ THE OZI EXPLORER HELP FILE HERE
When Ozi Explorer is loaded your navigation screen will
display as
giving you options for Road Mapping and Off Road.
Without this option your unit will default
to road mapping.
Ozi Explorer for off road is offered
as an option and must be done BEFORE the unit is shipped
(or the unit be returned for registering the unit etc).
Ozi Explorer area covered using Aus Geoscience off road
mapping:
Camera Options:
 
 
Bullet Number Plate Miniature
Tailgate A
Miniature Tailgate B
Heavy Duty Butterfly
Caravan Camera
|
Camera Options
|
CMOS
|
|
Bullet
CMOS |
|
|
Number Plate
CMOS
|
|
|
Miniature Tailgate
A CMOS |
|
|
Miniature Tailgate
B CMOS |
|
First Camera is automatically supplied with a 6M RCA cable
Second Camera is supplied with both 6M and 15M RCA cabling
GENERAL CONNECTIONS FOR ALL RCA MONITORS:
Both Camera and monitor need to be powered by connecting
Red - Positive
Black - Negative
If the power cable does not have Red/Black wires then
you will need to test using a multi meter. The inside
of the plug is positive, the outside negative
Some monitors may also have a green wire which, when
connected to the positive side of the reversing light
will make the camera display on input no 2. If
connecting a second camera then this wire should not be
connected (or a simple switch put in to disable it when
the second camera is connected). The monitor can be
manually turned on to display the camera at any time and
can be left on whilst driving.
The connection between the camera and the monitor is via
a simple RCA cable. Only the YELLOW is used.
If more instructions are needed then you
should be getting this unit professionally installed
Of course all items supplied should be tested BEFORE
installation.
|