|
BI7099 (7")
|
|
|
BI6089 (5.8")
|
|
Headrest / Reversing Monitor with shroud and stand
5.8" or 7" Inch Headrest/mounting stand In-Car TFT LCD Monitor
Headrest or mounting stand 2 options design: up to yourself
Blue screen when no video signal
On screen display function menu
PAL/NTSC auto switch
Power supply:7W/12VDC/ 0.7A
Image resolution: 1440 x 234 x 3 P
Contrast: 300:1
Lum: 250 - 300cd/m2
View angle range: (left/right)65 ° (top)40 ° (down)15°
Product size: 7" 172 x 115 x 20 mm ,
5.8" 153 x 105 x 30 mm ,
Color: Black.
READ THE FULL MANUAL 5"
READ THE FULL MANUAL 7"
Wired Camera Options:
Camera Options:
  
Bullet Number Plate
Miniature Tailgate Heavy
Duty Butterfly
These cameras are supplied with 7.5M of RCA cabling.
|
Camera Options
|
CMOS
|
|
Bullet
|
|
|
Number Plate
|
|
|
Heavy Duty Butterfly CMOS |
|
|
Heavy Duty Butterfly CCD
|
|
|
Miniature Tailgate
|
|
Second Camera – These cameras are supplied with both 7.5M and 15M RCA cabling cabling
GENERAL CONNECTIONS FOR ALL RCA MONITORS:
Both Camera and monitor need to be powered by connecting
Red - Positive
Black - Negative
If the power cable does not have Red/Black wires then
you will need to test using a multi meter. The inside
of the plug is positive, the outside negative
Some monitors may also have a green wire which, when
connected to the positive side of the reversing light
will make the camera display on input no 2. If
connecting a second camera then this wire should not be
connected (or a simple switch put in to disable it when
the second camera is connected). The monitor can be
manually turned on to display the camera at any time and
can be left on whilst driving.
The connection between the camera and the monitor is via
a simple RCA cable. Only the YELLOW is used.
If more instructions are needed then you
should be getting this unit professionally installed
Of course all items supplied should be tested BEFORE
installation.
|