Brash Imports   .. to place an order for this or any item contact me at office@brashimports.com.au

                                                                                                         
Wireless Monitor with Camera                                                        $ 220 Posted/Pickup

2.4G Wireless Portable color baby monitor with adjustable sound trigger level and I.Red

Features

Key Specifications/Special Features:

Features:
The kit includes one wireless color BabyCam CA200DP with night vision and one wireless 2.5 inch TFT-LCD monitor M250S.

An ideal system for baby care, elder or patient attendance, and housing monitoring; up to 200m transmitting range in open area

M250TS-2.4GHz wireless 2.5-inch TFT-LCD monitor:
Fresh new 2.5-inch TFT-LCD screen for high-quality color picture
The brightness, color, alarm volume and audio volume can be adjusted
Supports up to 3 cameras. Manual or auto switching among cameras, and the dwell/cycle time can be adjusted from 2 seconds to 30 seconds
Has motion detection alarm. Monitor beeps when motion detected by camera, and the alarm volume can be adjusted easily from the tuning
LCD can work with 3 modes: scan, auto and manual
In scan mode, the monitor hibernates in standby to save battery, and either motion trigger or press any button can activated it
In auto mode, the system automatically rotates through all active cameras
Work with three different power supplies: AC adapter, four pieces AA alkaline batteries and optional rechargeable battery pack
The monitor can be in portable use more than 4 hours with the optional rechargeable battery pack

CA200DP-2.4GHz wireless color BabyCam with night vision
Built-in microphone transmits sound form camera to monitor
Both color video and sharp audio transmission
The sensitivity of sound trigger is adjustable with the dial in the camera
Powered over 4 hours with our full charged battery pack (optional)
Can be table stand or be wall/ceiling mounting

Specifications:
M250TS monitor/receiver:
Screen mode: 2.5-inch fresh new TFT-LCD
Signal/noise ratio: 48dB
Display resolution (H x W): 480 x 284
Current consumption: approximately 800mA
Dimensions (W x H x D): 2.74 x 7.2 x 0.95 inches
CA200DP camera transmitter:
TV system: PAL
Integrated lens: 5.6mm, f2.0 fixed focus
Resolution: 360 TV lines
Image sensor: 1/3-inch color CMOS
Current consumption: approximately 200mA
Minimum illumination: 0.01 Lux
LED: eight pieces
Dimensions (W x H x D): 3.25 x 7.3 x 4.5 inches

READ THE FULL MANUAL HERE!

USE THIS CAMERA AND ADD ON MOTION DETECTION ONLY $ 30 MORE!

 

order now


Options:

Rechargeable Battery Pack  (Monitor)                 $ 30
Rechargeable Battery Pack  (Camera)                $ 30
Extra Camera                                                          $ 70
Motion Camera                                                      $ 100

(prices are for items sent with the above unit - otherwise add $5 postage)

Home