7 inch TFT touch screen, display resolution is 480×234
Stereo audio out, built in 1W hi-fi speaker, adjustable volume
Key-press and touch screen operate
built in SiRF STAR III GPS modules
Support TMC function
GPS antenna built in (can be connected with optional external antenna)
Auto checking AV-IN audio signal
Support outside AV audio and video signal input
Inbuilt Bluetooth
FM function
Video player support: asf,avi,mp4,wmv
Audio player support: mp3,wav,mid
Picture viewer support: BMP,JPG,PNG,GIF;
File viewer support: TXT
Inbuilt Long-life rechargeable DC12V lithium battery , can be connected CIG-LIGHT directly
Double indication light: red light on means charging, full charge turn to green
Comes with AC adaptor, cigarette lighter adaptor, dash mount
SPECIFICATIONS:
Environment parameters
Size
210mm*110mm*25.5mm
Operation temperature
-10℃~ +70℃
Storage temperature
-40℃~ +80℃
Operation humidity
45% ~ 80%RH
Storage humidity
30% ~ 90%RH
Atmospheric pressure
860MBar ~ 1060Mbar
System parameters
Operation frequency
400MHZ
MCU
SAMSUNG S3C2440A-40
SDRAM
64MB
NAND FLASH
64MB/128MB(customer optional, upto 1GB)
Navigation software
SD card or NANDFLASH built in
Operating system
WINCE 4.2 NET
Compiler type
ARMV4
General parameters
Video output
CVBS/NTSC
Video voltage
1.0Vpp/75 OU
TFT size
7inch
Display solution
480x234
VOICE OUTPUT
Mixed-track CD sound quality
Sound power
Double track earphone 0.25W/CHANEL, single channel 8ou/1W
Please run your mouse over this screen for more details
These maps are up to date and even include recently opened East Link. and have speed / red light cameras etc., turn by turn etc
This is the the most feature packed software for Australian roads on the market. For full features please download the manual via the link provided.
Camera Options: Bullet Number Plate
Miniature Tailgate
These cameras are supplied with 7.5M of RCA cabling.
Camera Options
CMOS
Bullet
Number Plate
Miniature Tailgate
Truck / Van
Second Camera – These cameras are supplied with both 7.5M and 15M RCA cabling
GENERAL CONNECTIONS FOR ALL RCA MONITORS:
Both Camera and monitor need to be powered by connecting
Red - Positive
Black - Negative
If the power cable does not have Red/Black wires then
you will need to test using a multi meter. The inside
of the plug is positive, the outside negative
Some monitors may also have a green wire which, when
connected to the positive side of the reversing light
will make the camera display on input no 2. If
connecting a second camera then this wire should not be
connected (or a simple switch put in to disable it when
the second camera is connected). The monitor can be
manually turned on to display the camera at any time and
can be left on whilst driving.
The connection between the camera and the monitor is via
a simple RCA cable. Only the YELLOW is used.
If more instructions are needed then you
should be getting this unit professionally installed
Of course all items supplied should be tested BEFORE
installation.