|
MIRROR MONITOR
Monitor Features:
7inch TFT LCD
Sharp Color TFT-LCD monitor
NTSC/PAL system
16:9 mode
Brightness / contrast / color adjustment
Operation is display on screen by OSD menu
Inputs - 2 x RCA
Angle : H:100; VL 80;
Brightness:350 Contrast: 200
Another video connect with 300thousand resolution camera
Full function remote control
Overall size is approx 10.6" x 4" x 1" and will fit nearly every car
The unit will has adjustable clips and so it will clip on, over your existing mirror.
When this unit is not displaying an image it becomes a ordinary mirror
Wired Camera Options:
Camera Options:
  
Bullet Number Plate
Miniature Tailgate Heavy
Duty Butterfly
These cameras are supplied with 7.5M of RCA cabling.
|
Camera Options
|
CMOS
|
|
Bullet
|
|
|
Number Plate
|
|
|
Heavy Duty Butterfly CMOS |
|
|
Heavy Duty Butterfly CCD
|
|
|
Miniature Tailgate
|
|
Second Camera – These cameras are supplied with both 7.5M and 15M RCA cabling cabling
GENERAL CONNECTIONS FOR ALL RCA MONITORS:
Both Camera and monitor need to be powered by connecting
Red - Positive
Black - Negative
If the power cable does not have Red/Black wires then
you will need to test using a multi meter. The inside
of the plug is positive, the outside negative
Some monitors may also have a green wire which, when
connected to the positive side of the reversing light
will make the camera display on input no 2. If
connecting a second camera then this wire should not be
connected (or a simple switch put in to disable it when
the second camera is connected). The monitor can be
manually turned on to display the camera at any time and
can be left on whilst driving.
The connection between the camera and the monitor is via
a simple RCA cable. Only the YELLOW is used.
If more instructions are needed then you
should be getting this unit professionally installed
Of course all items supplied should be tested BEFORE
installation.
|